Om Metalab Services Private Limited

This practice describes the procedure by which the copper–copper sulfate–16 % sulfuric acid test is conducted to determine the susceptibility of austenitic stainless steels to intergranular attack. The presence or absence of intergranular corrosion in this test is not necessarily a measure of the performance of the material in other corrosive media. The test does not provide a basis for predicting resistance to other forms of corrosion, such as general corrosion, pitting, or stresscorrosion cracking.

Impact Testing of metals is performed to determine the impact resistance or toughness of materials by calculating the amount of energy absorbed during fracture. The impact test is performed at various temperatures to uncover any effects on impact energy. These services provide test results that can be very useful in assessing the suitability of a material for a specific application and in predicting its expected service life.

The bend test is a simple and inexpensive qualitative test that can be used to evaluate both the ductility and soundness of a material. It is often used as a quality control test for butt-welded joints, having the advantage of simplicity of both test piece and equipment. This standard specifies the method for determining the ability of metallic wire of diameter or thickness O-3 to 10 mm inclusive to undergo plastic deformation during reverse bending. The range of diameters or thicknesses for which this standard is applicable may be more exactly specified in the relevant product standard. 1 The reverse bend test consists of repeated bending, through 90” in opposite directions, of a test piece held at one end, each bend being over a cylindrical support of a specified radius.

One of the top NABL accredited laboratories, our "Om Metalab Services Pvt Ltd" follows national and international standards like ASTM, ASME, AISI, GOST, JIS, DIN, BS, and IS to give the most accurate and trustworthy material test reports for all products and classes.
The Lab is fully equipped with modern machines like: Universal Testing Machine, Optical Brinell Hardness Tester, Impact Testing Machine, Spectrometer, Digital Thermometer with Sensor, Positive Material Identifications (PMI), Micro Examination Test, Macro Examination Test, Case Depth, Grain size, Inclusion Rating etc. are all available in the lab.
Our lab provides NDT services such as Dye Penetrant Test, Magnetic Particle inspection, and Ultrasonic Test.

One of the top NABL accredited laboratories, our "Om Metalab Services Pvt Ltd" follows national and international standards like ASTM, ASME, AISI, GOST, JIS, DIN, BS, and IS to give the most accurate and trustworthy material test reports for all products and classes.
The Lab is fully equipped with modern machines like: Universal Testing Machine, Optical Brinell Hardness Tester, Impact Testing Machine, Spectrometer, Digital Thermometer with Sensor, Positive Material Identifications (PMI), Micro Examination Test, Macro Examination Test, Case Depth, Grain size, Inclusion Rating etc. are all available in the lab.
Our lab provides NDT services such as Dye Penetrant Test, Magnetic Particle inspection, and Ultrasonic Test.

Wet chemistry is a form of analytical chemistry that uses classical methods such as observation to an analysis of materials. It is called Wet chemistry since most analysing is done in the liquid phase

One of the top NABL accredited laboratories, our "Om Metalab Services Pvt Ltd" follows national and international standards like ASTM, ASME, AISI, GOST, JIS, DIN, BS, and IS to give the most accurate and trustworthy material test reports for all products and classes.
The Lab is fully equipped with modern machines like: Universal Testing Machine, Optical Brinell Hardness Tester, Impact Testing Machine, Spectrometer, Digital Thermometer with Sensor, Positive Material Identifications (PMI), Micro Examination Test, Macro Examination Test, Case Depth, Grain size, Inclusion Rating etc. are all available in the lab.
Our lab provides NDT services such as Dye Penetrant Test, Magnetic Particle inspection, and Ultrasonic Test.

One of the top NABL accredited laboratories, our "Om Metalab Services Pvt Ltd" follows national and international standards like ASTM, ASME, AISI, GOST, JIS, DIN, BS, and IS to give the most accurate and trustworthy material test reports for all products and classes.
The Lab is fully equipped with modern machines like: Universal Testing Machine, Optical Brinell Hardness Tester, Impact Testing Machine, Spectrometer, Digital Thermometer with Sensor, Positive Material Identifications (PMI), Micro Examination Test, Macro Examination Test, Case Depth, Grain size, Inclusion Rating etc. are all available in the lab.
Our lab provides NDT services such as Dye Penetrant Test, Magnetic Particle inspection, and Ultrasonic Test.

 

Titanium Elemental Testing Services

We offer accurate chemical composition analysis of titanium and titanium alloys, including:

Aluminium (Al) and Vanadium (V)

Iron (Fe), Chromium (Cr), Nickel (Ni), Manganese (Mn)

Oxygen (O), Nitrogen (N), Hydrogen (H) (critical interstitial elements)

 

Testing Scope & Range

·       Aluminium (Al): 4.0 % to 7.0 %

·       Vanadium (V): 3.50 % to 5.00 %

·       Iron (Fe): 0.043 % to 0.30 %

·       Chromium (Cr): 0.006 % to 0.10 %

·       Manganese (Mn): 0.005 % to 0.05 %

·       Nickel (Ni): 0.006 % to 0.10 %

·       Carbon (C): 0.001 % to 0.05 %

·       Oxygen (O): 0.01 % to 0.30 %

·       Nitrogen (N): 0.001 % to 0.030 %

 

·       Hydrogen (H): 0.001 % to 0.015 %

Ultrasonic Testing (UT) comprises a range of Non-Destructive Testing (NDT) techniques that
send ultrasonic waves throug h an object or material. These high frequency sound waves
are transmitted into materials to characterise the material or for flaw detecting. Most UT
inspection applications use short pulse waves with frequencies ranging from 0.1-15 MHz,
although frequencies up to 50 MHz can be used. One common application for this test
method is ultrasonic thickness measurement, which is used to ascertain the thickness of an
object such as when assessing pipework corrosion.

One of the top NABL accredited laboratories, our "Om Metalab Services Pvt Ltd" follows national and international standards like ASTM, ASME, AISI, GOST, JIS, DIN, BS, and IS to give the most accurate and trustworthy material test reports for all products and classes.
The Lab is fully equipped with modern machines like: Universal Testing Machine, Optical Brinell Hardness Tester, Impact Testing Machine, Spectrometer, Digital Thermometer with Sensor, Positive Material Identifications (PMI), Micro Examination Test, Macro Examination Test, Case Depth, Grain size, Inclusion Rating etc. are all available in the lab.
Our lab provides NDT services such as Dye Penetrant Test, Magnetic Particle inspection, and Ultrasonic Test.

Microscopic Examination is conducted to study the microstructural features of the material under magnification. The properties of a material determine how well it will perform under a given application, and these properties are dependent on the structure of the material. Turn on screen reader support Utkarsh Maloo has joined the document.

One of the top NABL accredited laboratories, our "Om Metalab Services Pvt Ltd" follows national and international standards like ASTM, ASME, AISI, GOST, JIS, DIN, BS, and IS to give the most accurate and trustworthy material test reports for all products and classes.
The Lab is fully equipped with modern machines like: Universal Testing Machine, Optical Brinell Hardness Tester, Impact Testing Machine, Spectrometer, Digital Thermometer with Sensor, Positive Material Identifications (PMI), Micro Examination Test, Macro Examination Test, Case Depth, Grain size, Inclusion Rating etc. are all available in the lab.
Our lab provides NDT services such as Dye Penetrant Test, Magnetic Particle inspection, and Ultrasonic Test.

The Flattening Test checks how well metal can deform without cracking, often used for pipes and tubes. It assesses the material's ductility and resistance to ensure it's fit for your needs.

New SPECTROMAXx Advanced offers all the base model’s advantages, including the air optic, while adding a new UV optic with four high-resolution CMOS detectors (adopted from SPECTROLAB S). Its extended wavelength range covers elements in the range of 120 nm to 235 nm. A closed system circulates gas through SPECTRO’s UV Plus cleaning cartridge, eliminating extra argon consumption and contamination risks.

Spectro provides an outstanding platform for carrying out tests of almost all the recognized elements of the periodic table. Whether the sample is a metal or a non metal or an alloy, we are fully equipped with all the instruments required for its quantitative as well as qualitative analysis.